Driver's door open and key removed from ignition switch
Insert key into ignition switch, then remove it
Within 5 seconds
Insert key into ignition switch, then remove it
Within 40 seconds
Close and open driver's door twice
Insert key into ignition switch, then remove it
Within 40 seconds
Close and open driver's door twice
Insert key into ignition switch
Close driver's door
Within 40 seconds
Switch ignition ON and OFF once to program a new key code whilst retaining the original codes or twice to program
a new key code whilst erasing the original codes
Remove key
System should now lock and unlock vehicle, once or twice depending which mode has been selected
Carry out the following button procedure within 45 seconds
Simultaneously press and hold key lock and unlock buttons for 1-1,5 seconds
Within 3 seconds
Press key lock or unlock button for a minimum of 1 second and release
Within 5 seconds
System should now lock and unlock vehicle
NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat button
procedure
Within 45 seconds: If required repeat button procedure to program remaining keys
NOTE: To exit programming mode: Open driver's door
بالنسبه للسحب لازم تكشف علي العربية بالكومبيوتر